47 2 3 4 5 6 this is a thin, low-profile 2.0mm (.079") pitch connector 7.5mm (.295") in height after mounting and 4.5mm (.177") in width. it is designed to meet the demand for high-density connection of internal wires to printed circuit boards. it is compact, highly reliable and low in cost. features ?reliable contact the contact has long dimples near the center to ensure a good connection at all times, even under conditions of vibration and mechanical abuse, and when used with low voltage and low current circuits. ?fully shrouded header the fully shrouded header has walls on all four sides to prevent improper connection to the mating housing and to prevent the instruction of flux and other contaminants. ?printed circuit board retention mechanism the solder side of the header has a retention mechanism that prevents it from floating during soldering. as a result, the header can be positioned accurately. ?surface mount model (smt) this connector is also available in a surface mount configuration. its housing is made of heat resistant resin so that it is not adversely affected during reflow soldering. because of its tiny size and ability to be surface mounted, this connector meets the demand for high-density mounting of components inside electronic products. specifications ?current rating: 2a ac, dc (awg #24) ?voltage rating: 100v ac, dc ?temperature range: - 25?c to + 85?c (including temperature rise in applying electrical current) ?contact resistance: initial value/10m ? max. after environmental testing/20m ? max. ?insulation resistance: 1,000m ? min. ?withstanding voltage: 800v ac/minute ?applicable wire: awg #32 to #24 ?applicable pc board thickness: 0.8 to 1.6mm(.031" to .063") * contact jst if lead-free product is required. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 2 r75087 ph connector disconnectable crimp style connectors 2.0mm (.079") pitch crimp emboss tape
48 ph connector note: 1. contact jst for gold-plated contacts. 2. sph-002t-p0.5l is low-insertion force type contact, for easier insertion/ withdrawal, which would be less resistant to the vibration. the crimp height is different from the standard. 3. when using awg#32 or #30 wires, reflow-treated headers (low insertion force type, model no. b#b-ph-kl or s#b-ph-kl) are recommendable. 4. contact jst for details. contact 1.0 (.039) 2.08 (.082) 1.5 (.059) 5.7(.224) 2.85(.112) 2.05(.081) model no. applicable wire mm 2 awg # insulation o.d. mm(in.) q'ty / reel material and finish sph-002t-p0.5s sph-002t-p0.5l sph-004t-p0.5s 0.05 to 0.22 0.08 to 0.22 0.032 to 0.08 30 to 24 28 to 24 32 to 28 0.9 to 1.5(.035 to .059) 0.8 to 1.5(.031 to .059) 0.5 to 0.9(.020 to .035) phosphor bronze, tin-plated 8,000 8,000 10,000 housing 0.6(.024) a b 6.35(.250) 1.9 (.075) 2.0 (.079) 4.5(.177) 0.5 (.020) circuit no.1 cir- cuits model no. dimensions mm(in.) ab q'ty / box material 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 phr- 2 phr- 3 phr- 4 phr- 5 phr- 6 phr- 7 phr- 8 phr- 9 phr-10 phr-11 phr-12 phr-13 phr-14 phr-15 phr-16 2.0( .079) 4.0( .157) 6.0( .236) 8.0( .315) 10.0( .394) 12.0( .472) 14.0( .551) 16.0( .630) 18.0( .709) 20.0( .787) 22.0( .866) 24.0( .945) 26.0(1.024) 28.0(1.102) 30.0(1.181) 5.8( .228) 7.8( .307) 9.8( .386) 11.8( .465) 13.8( .543) 15.8( .622) 17.8( .701) 19.8( .780) 21.8( .858) 23.8( .937) 25.8(1.016) 27.8(1.094) 29.8(1.173) 31.8(1.252) 33.8(1.331) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 nylon 66, ul94v-0, natural (white) as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. phr-2-oo - (blank)?atural (white) bk?lack r?ed tr?omato red bl?lue y?ellow l?emon yellow m?reen d?range n?rown p?urple pk?ink h?ray le?ight blue fy?ivid yellow
49 b a 1.95 (.077) 4.5(.177) 1.7(.067) 6.0(.236) 3.4 (.134) 0.5 (.020) circuit no.1 (.134) 3.4 b a 1.95 (.077) 2.0 (.079) 0.5 (.020) 4.8(.189) 1.7(.067) 6.25(.246) 6.0(.236) 1.6 (.063) circuit no.1 b 6.0(.236) (.134) a 1.95 (.077) 2.0 (.079) 0.5 (.020) 3.4 4.5(.177) 1.7(.067) circuit no.1 through-hole type shrouded header top entry type side entry type top entry type side entry type cir- cuits model no. dimensions mm(in.) a b q'ty / box material and finish 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 2.0( .079) 4.0( .157) 6.0( .236) 8.0( .315) 10.0( .394) 12.0( .472) 14.0( .551) 16.0( .630) 18.0( .709) 20.0( .787) 22.0( .866) 24.0( .945) 26.0(1.024) 28.0(1.102) 30.0(1.181) 5.9( .232) 7.9( .311) 9.9( .390) 11.9( .469) 13.9( .547) 15.9( .626) 17.9( .705) 19.9( .783) 21.9( .862) 23.9( .941) 25.9(1.020) 27.9(1.098) 29.9(1.177) 31.9(1.256) 33.9(1.335) 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500 250 250 250 250 1,000 1,000 500 500 500 500 250 250 250 250 250 250 250 200 200 post: brass, copper-undercoated, tin/lead-plated wafer: nylon 66, ul94v-0, natural (white) s 2b-ph-k-s s 3b-ph-k-s s 4b-ph-k-s s 5b-ph-k-s s 6b-ph-k-s s 7b-ph-k-s s 8b-ph-k-s s 9b-ph-k-s s10b-ph-k-s s11b-ph-k-s s12b-ph-k-s s13b-ph-k-s s14b-ph-k-s s15b-ph-k-s s16b-ph-k-s b 2b-ph-k-s b 3b-ph-k-s b 4b-ph-k-s b 5b-ph-k-s b 6b-ph-k-s b 7b-ph-k-s b 8b-ph-k-s b 9b-ph-k-s b10b-ph-k-s b11b-ph-k-s b12b-ph-k-s b13b-ph-k-s b14b-ph-k-s b15b-ph-k-s b16b-ph-k-s the shrouded headers are interchangeable with those of the kr, krd and cr insulation displacement connectors. top entry type side entry type (2 circuits) (3 circuits or more) ph connector as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. b2b-ph-k-oo - s?atural (white) k?lack r?ed tr?omato red e?lue y?ellow l?emon yellow m?reen o?range n?rown p?urple pk?ink h?ray le?ight blue fy?ivid yellow (blank)?vory
50 ph connector top entry type side entry type top entry type side entry type cir- cuits model no. dimensions mm(in.) ab q'ty / box material and finish 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 b 2b-ph-kl b 3b-ph-kl b 4b-ph-kl b 5b-ph-kl b 6b-ph-kl b 7b-ph-kl b 8b-ph-kl b 9b-ph-kl b10b-ph-kl b11b-ph-kl b12b-ph-kl b13b-ph-kl b14b-ph-kl b15b-ph-kl b16b-ph-kl s 2b-ph-kl s 3b-ph-kl s 4b-ph-kl s 5b-ph-kl s 6b-ph-kl s 7b-ph-kl s 8b-ph-kl s 9b-ph-kl s10b-ph-kl s11b-ph-kl s12b-ph-kl s13b-ph-kl s14b-ph-kl s15b-ph-kl s16b-ph-kl 2.0( .079) 4.0( .157) 6.0( .236) 8.0( .315) 10.0( .394) 12.0( .472) 14.0( .551) 16.0( .630) 18.0( .709) 20.0( .787) 22.0( .866) 24.0( .945) 26.0(1.024) 28.0(1.102) 30.0(1.181) 5.9( .232) 7.9( .311) 9.9( .390) 11.9( .469) 13.9( .547) 15.9( .626) 17.9( .705) 19.9( .783) 21.9( .862) 23.9( .941) 25.9(1.020) 27.9(1.098) 29.9(1.177) 31.9(1.256) 33.9(1.335) 1,000 1,000 1,000 1,000 1,000 500 500 500 500 500 500 250 250 250 250 1,000 1,000 500 500 500 500 250 250 250 250 250 250 200 200 200 post: copper alloy, copper-undercoated, tin/lead-plated (reflow-treated) wafer: nylon 66, ul94v-0, gray b a 1.95 (.077) 4.5(.177) 1.7(.067) 6.0(.236) 3.4 (.134) 0.5 (.020) circuit no.1 (.134) 3.4 b a 1.95 (.077) 2.0 (.079) 0.5 (.020) 4.8(.189) 1.7(.067) 6.25(.246) 6.0(.236) 1.6 (.063) circuit no.1 b 6.0(.236) (.134) a 1.95 (.077) 2.0 (.079) 0.5 (.020) 3.4 4.5(.177) 1.7(.067) circuit no.1 top entry type side entry type (2 circuits) (3 circuits or more) through-hole type shrouded header 2.0 0.05 (.079 .002) 0.7 + 0.1 (.028 + .004 )dia. 0 0 4.5 (.177) 8.0(.315) 6.0(.236) 2.0 0.05 (.079 .002) 0.7 +0.1 (.028 + .004 )dia. 0 0 7.6(.299) 9.6(.378) 4.8(.189) 6.25 (.246) through-hole type pc board layout (viewed from soldering side) and assembly layout note: 1. tolerances are non-cumulative: 0.05mm( .002") for all centers. 2. hole dimensions differ according to the kind of printed circuit board and piercing method. if printed circuit boards made o f hard material are used, the hole dimensions should be larger. the hole dimensions shown above are reference values. contact jst for details. top entry type side entry type as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. b2b-ph-kl-oo - (blank)?ray r?ed e?lue s?atural (white)
51 smt type shrouded header the shrouded headers are interchangeable with those of the kr, krd and cr insulation displacement connectors. ?mt type shrouded headers are not tu v approved. b a 2.975 (.117) 2.0(.079) 5.0 (.197) [2.0 (.079)] 1.9(.075) 6.6(.260) 2.2 (.087) 1.4 (.055) circuit no.1 b a 2.95 (.116) 2.0 (.079) 2.4(.094) 5.5(.217) 6.0(.236) (.063) 1.6 [2.6 (.102)] sm3, sm4 type sm3 type sm4 type side entry type top entry type cir- cuits model no. dimensions mm(in.) top entry type side entry type top entry type side entry type a b q'ty / reel material and finish 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 b 2b-ph-sm3-tb b 3b-ph-sm3-tb b 4b-ph-sm3-tb b 5b-ph-sm3-tb b 6b-ph-sm3-tb b 7b-ph-sm3-tb b 8b-ph-sm3-tb b 9b-ph-sm3-tb b10b-ph-sm3-tb b11b-ph-sm3-tb b12b-ph-sm3-tb b13b-ph-sm3-tb b14b-ph-sm3-tb b15b-ph-sm3-tb b16b-ph-sm3-tb s 2b-ph-sm3-tb s 3b-ph-sm3-tb s 4b-ph-sm3-tb s 5b-ph-sm3-tb s 6b-ph-sm3-tb s 7b-ph-sm3-tb s 8b-ph-sm3-tb s 9b-ph-sm3-tb s10b-ph-sm3-tb ? s12b-ph-sm3-tb s13b-ph-sm3-tb s14b-ph-sm3-tb s15b-ph-sm3-tb ? 2.0( .079) 4.0( .157) 6.0( .236) 8.0( .315) 10.0( .394) 12.0( .472) 14.0( .551) 16.0( .630) 18.0( .709) 20.0( .787) 22.0( .866) 24.0( .945) 26.0(1.024) 28.0(1.102) 30.0(1.181) 7.9( .311) 9.9( .390) 11.9( .469) 13.9( .547) 15.9( .626) 17.9( .705) 19.9( .783) 21.9( .862) 23.9( .941) 25.9(1.020) 27.9(1.098) 29.9(1.177) 31.9(1.256) 33.9(1.335) 35.9(1.413) 7.95( .313) 9.95( .392) 11.95( .470) 13.95( .549) 15.95( .628) 17.95( .707) 19.95( .785) 21.95( .864) 23.95( .943) 25.95(1.022) 27.95(1.100) 29.95(1.179) 31.95(1.258) 33.95(1.337) 35.95(1.415) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 post: copper alloy, copper-undercoated, tin/lead-plated wafer: nylon 46, ul94v-0, natural (white) solder tab: brass, copper-undercoated, tin/lead-plated cir- cuits model no. dimensions mm(in.) top entry type side entry type top entry type side entry type a b q'ty / reel material and finish 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 b 2b-ph-sm4-tb b 3b-ph-sm4-tb b 4b-ph-sm4-tb b 5b-ph-sm4-tb b 6b-ph-sm4-tb b 7b-ph-sm4-tb b 8b-ph-sm4-tb b 9b-ph-sm4-tb b10b-ph-sm4-tb b11b-ph-sm4-tb b12b-ph-sm4-tb b13b-ph-sm4-tb b14b-ph-sm4-tb b15b-ph-sm4-tb b16b-ph-sm4-tb s 2b-ph-sm4-tb s 3b-ph-sm4-tb s 4b-ph-sm4-tb s 5b-ph-sm4-tb s 6b-ph-sm4-tb s 7b-ph-sm4-tb s 8b-ph-sm4-tb s 9b-ph-sm4-tb s10b-ph-sm4-tb s11b-ph-sm4-tb s12b-ph-sm4-tb s13b-ph-sm4-tb s14b-ph-sm4-tb s15b-ph-sm4-tb ? 2.0( .079) 4.0( .157) 6.0( .236) 8.0( .315) 10.0( .394) 12.0( .472) 14.0( .551) 16.0( .630) 18.0( .709) 20.0( .787) 22.0( .866) 24.0( .945) 26.0(1.024) 28.0(1.102) 30.0(1.181) 7.9( .311) 9.9( .390) 11.9( .469) 13.9( .547) 15.9( .626) 17.9( .705) 19.9( .783) 21.9( .862) 23.9( .941) 25.9(1.020) 27.9(1.098) 29.9(1.177) 31.9(1.256) 33.9(1.335) 7.95( .313) 9.95( .392) 11.95( .470) 13.95( .549) 15.95( .628) 17.95( .707) 19.95( .785) 21.95( .864) 23.95( .943) 25.95(1.022) 27.95(1.100) 29.95(1.179) 31.95(1.258) 33.95(1.337) 35.95(1.415) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 post: copper alloy, copper-undercoated, tin-plated wafer: 6t nylon, ul94v-0, natural (white) solder tab: brass, nickel-undercoated, tin/copper alloy-plated note: contact jst for the top entry type headers with suction cap. note: contact jst for the top entry type headers with suction cap. ph connector as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. b2b-ph-sm3-oo -tb (blank)?atural (white) r?ed e?lue m?reen l?emon yellow k?lack
52 ph connector taping specifications feeding direction ( + .098 - .039 [13(.512)dia.] w1 + 2.5 - 1.0 ) 380 2.0(14.961 .079)dia. 2.0 0.5 (.079 .020) f 0.1 (.004) w 0.3(.012) 4.0 0.1 (.157 .004) feeding direction 1.75 0.1 (.069 .004) 2.0 0.1 (.079 .004) 1.55 0.05 (.061 .002)dia. 12.0 0.1 (.472 .004) cover tape carrier tape 4.0 0.1 (.157 .004) 2.0 0.1 (.079 .004) 12.0 0.1 (.472 .004) feeding direction 1.55 0.05 (.061 .002)dia. f 0.1 (.004) w 0.3(.012) 1.75 0.1 (.069 .004) s 0.1(.004) cover tape carrier tape f 0.1 (.004) w 0.3(.012) 4.0 0.1 (.157 .004) 1.75 0.1 (.069 .004) 2.0 0.1 (.079 .004) 12.0 0.1 (.472 .004) 1.55 0.05 (.061 .002)dia. feeding direction cover tape carrier tape 4.0 0.1 (.157 .004) 2.0 0.1 (.079 .004) 12.0 0.1 (.472 .004) feeding direction 1.55 0.05 (.061 .002)dia. f 0.1 (.004) w 0.3(.012) 1.75 0.1 (.069 .004) s 0.1(.004) carrier tape cover tape feeding direction cover tape leader carrier tape the end part 160 (6.299)min. connector mounting part 400(15.748)min. leader part 100(3.937)min. top entry type (2 to 6 circuits) top entry type (7 to 16 circuits) note: 1. specifications conform to jis c 0806. the tape width, connector loading recess square hole dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded. 2. specifications are subject to change without prior notice. 17.5( .689) 25.5(1.004) 33.5(1.319) 45.5(1.791) 57.5(2.264) 17.5( .689) 25.5(1.004) 33.5(1.319) 45.5(1.791) 57.5(2.264) 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 fsww1 16.0( .630) 24.0( .945) 32.0(1.260) 44.0(1.732) 56.0(2.205) 16.0( .630) 24.0( .945) 32.0(1.260) 44.0(1.732) 56.0(2.205) 28.4(1.118) 40.4(1.591) 52.4(2.063) 28.4(1.118) 40.4(1.591) 52.4(2.063) 7.5( .295) 11.5( .453) 14.2( .559) 20.2( .795) 26.2(1.031) 7.5( .295) 11.5( .453) 14.2( .559) 20.2( .795) 26.2(1.031) 2 to 3 4 to 6 7 to 9 10 to 14 15 to 16 2 to 3 4 to 6 7 to 9 10 to 14 15 circuits taping dimensions mm(in.) q'ty / reel reel dimensions mm(in.) top entry type side entry type side entry type (2 to 6 circuits) side entry type (7 to 15 circuits)
53 smt type pc board layout (viewed from component side) and assembly layout 1.6 0.1 (.063 .004) 1.6 0.1 (.063 .004) 2.0 0.05 (.079 .002) 1.0 (.039) 3.0 0.1 (.118 .004) 1.0 min. (.039) end face of wafer on the mating side 7.5(.295) min. max. 2.0(.079) 5.0(.197) [2.0(.079)] 8.6(.339) 6.6(.260) max. 9.0(.354) min. (.039) 3.4 0.1 (.134 .004) 0.2 (.008) 1.5 0.1 (.059 .004) 1.6 0.1 (.063 .004) 2.0 0.05 (.079 .002) end face of wafer on the mating side 1.0 min. 5.5(.217) 7.6 (.299) 9.6 (.378) 1.0 (.039) 5.5 (.217) sm3, sm4 type side entry type top entry type note: 1. tolerances are non-cumulative: 0.05mm( .002" ) for all centers. 2. the dimensions above should serve as a guideline. contact jst for details. ph connector contact crimp applicator mks-l(-10) compact crimp applicator mks-ls strip-crimp applicator mks-sc with safety cover without safety cover with safety cover without safety cover with safety cover applicator for the semi-automatic press ap-k2n sph-002t-p0.5s aplmk sph002-05s aplnc sph002-05s aplmkls sph002-05s apllsnc sph002-05s aplsc sph002-05s sph-004t-p0.5s aplmk sph004-05s aplnc sph004-05s aplsc sph004-05s sph-002t-p0.5l aplmk sph002-05l aplnc sph002-05l aplmkls sph002-05l apllsnc sph002-05l aplsc sph002-05l
|
